Description
2 year warranty
Four button control fascia with special programmes button, operational self-diagnostics & alarms menu
- Improved wash action from quick release parallel wash & rinse arm design.
- Stainless steel scrap tray filters supplied as standard.
- Improved triple wash tank filtration system.
- Drain pump and breaktank supplied as standard.
- Three standard cycle time options with an extensive range of special cycles.
- Cycle times can be tailored to site requirements.
- Reduced water consumption.
- Comprehensive automatic self-cleaning at end of service.
- Selectable energy saving mode.
- Selectable thermostop ensures optimum rinse temperatures.
- Fully double skinned body & hood construction minimising both acoustic output and reduced heat-loss
- Easy lift super glide hood system.
- Patented dual flow wash pump – reducing power consumption whilst retaining wash efficiency.
- Moulded wash tank for easy cleaning.
- Accurate detergent & rinse aid peristaltic dosing pumps as standard.
- Supplied with one pegged rack, one open cup/glass rack & cutlery insert.
Technical:
- 2121 standard voltage 230V – single phase (can be supplied for 3 phase – please specify at time of order)
- Suitable for hot (max 50°C) or cold water supply, typically at 2 to 4 bar dynamic supply pressure, refer to specification sheets for individual requirements.
- Wash temperature 60°C (adjustable)
- Rinse temperature 82°C (adjustable)
- Cycle times between 70 & 715 secs, including special cycles.
Measurements:
Height adjustable from 1535 to 1595 (hood closed), 2050 to 2110mm (hood open).
W – 640mm
D – 755mm
H – 1535mm (including adjustable feet)
Rack Size: 500mm
Useable Height: 440mm
Cycle Options: 3 Cycles
Power kW: 4.7/6.7
Amps Required: 20/30
- Requires a waste up stand for correct operation.
- Restrictive waste connections should be avoided for all installations.
- Machines fitted to cold water supply will not be capable of running repeated short cycles. The cycle time will automatically be extended to allow for recovery of correct operating temperatures.
- Machines will be supplied for 30 amp supply as standard, if 20 amp required specify at time of order.
- It is strongly recommended that 500mm machines are installed on hot water fill (max 50°C) for optimum performance.
