Description
2 year warranty
Four button bright LED display with soft touch controls, twin traffic lights giving instant status updates & operational self-diagnostics.
- HEAT RECOVERY offers up to 25% less power required to heat rinse water.
- HR module supplied separately with simple bolt on instructions.
- Reduces need for extraction hood and improves working environment.
- C2035 WS HR with heat recovery, drain pump and improved internal continuous water softener design with increased range of water hardness settings as standard.
- Increased usable height.
- Alarms menu with hi-level information retrieval.
- Improved wash action from quick release parallel wash & rinse arm design.
- Easy lift soft glide hood system.
- Supplied with breaktank as standard.
- Three standard cycle time options with further options available.
- Cycle times can be tailored to site requirements.
- Reduced water consumption.
- Automatic self-cleaning at end of service.
- Selectable energy saving mode.
- Selectable thermostop ensures optimum rinse temperatures.
- Patented dual flow wash pump– reducing power consumption whilst retaining wash efficiency.
- Moulded wash tank for easy cleaning l Surface scrap tray filters supplied as standard.
- Accurate detergent & rinse aid peristaltic dosing pumps as standard.
- Supplied with one pegged rack, one open cup/glass rack & cutlery insert.
Technical
- Standard voltage 230V – single phase (can be supplied for 3 phase – please specify at time of order)
- Suitable for cold water supply only, typically at 2 to 4 bar dynamic supply pressure, refer to specification sheets for individual requirements. Cannot be used with hot water supply.
- Wash temperature 60°C (adjustable)
- Rinse temperature 82°C (adjustable)
- Cycle times between 70 & 240 secs
Measurements:
(Height adjustable from 2200 to 2260mm)
W – 640mm
D – 745mm
H – 2200mm
Rack Size: 500mm
Useable Height: 435mm
Cycle Options: 3 Cycles
Power kW: 4.5/6.5
Amps Required: 20/30
- Requires a waste up stand for correct operation. Restrictive waste connections should be avoided for all installations.
- Machines fitted to cold water supply will not be capable of running repeated short cycles. The cycle time will automatically be extended to allow for recovery of correct operating temperatures.
- Machines will be supplied for 30 amp supply as standard, if 20 amp required specify at time of order.
